CORROSIONPROTECTION 59a55410d146d50b3036cdb1 False 24 25
OK
background image not found
Found results for
'alter certain manufacturability objectives'
Sand Blasting Service ( As per industry this process banned so instead of sand we use copper slag ) INR   0 INR  0
-NaN%

Sand Blasting Service ( As per industry this process banned so instead of sand we use copper slag )

nd Blasting Services Abrasive blasting, more commonly known as sandblasting, is the operation of forcibly propelling a stream of abrasive material against a surface under high pressure to smooth a rough surface, roughen a smooth surface, shape a surface or remove surface contaminants. A pressurized fluid, typically compressed air, or a centrifugal wheel is used to propel the blasting material (often called the media). The first abrasive blasting process was patented by Benjamin Chew Tilghman on 18 October 1870.[1] There are several variants of the process, using various media; some are highly abrasive, whereas others are milder. The most abrasive are shot blasting (with metal shot) and sandblasting (with sand). Moderately abrasive variants include glass bead blasting (with glass beads) and media blasting with ground-up plastic stock or walnut shells and corncobs. Some of these substances can cause anaphylactic shock to both operators and passers by.[2] A mild version is soda blasting (with baking soda). In addition, there are alternatives that are barely abrasive or nonabrasive, such as ice blasting and dry-ice blasting.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Flame Spray Aluminum Coating Services INR   0 INR  0
-NaN%

Flame Spray Aluminum Coating Services

Flame Spray Coating Services Flame spraying is a thermal spray coating process that produces high quality surface coatings using heat, from the combustion of a fuel gas with oxygen, to melt a spray coating material which is propelled onto a substrate. Flame spraying offers a cost effective alternative for applying metallic and ceramic coatings in a less demanding environment. The utilization of the flame spraying surface treatment allows the spraying of a wide variety of metallic or ceramic coatings on to a large range of component materials where good wear resistance and excellent impact resistance are required. As the surface technology specialists in flame spraying, Bodycote provides an array of thermal spray coating materials to suit your specific needs. Backed by a customer-driven service, our facilities process a wide variety of component sizes to exacting standards with reliable, repeatable results. Benefits There are particular reasons why flame spraying may be used: Component geometry or the working environment requires manual thermal spraying, offering the easiest working conditions; Large & complex areas (structures); The required thermal spray coating performance is achieved with flame spraying; and Cost effective Application & materials : Flame spraying is widely used where a cost effective thermal spray coating is desired and a lower quality can be tolerated. The majority of components are sprayed manually. Corrosion protection; structures and components Reclamation worn shafts, particularly of bearing areas with materials such as stainless steel or bronze alloys The surface coatings produced are porous and lubricants can be absorbed into the coating, enhancing performance of the bearing. Aluminium, zinc, stainless steel, bronze, low carbon steel, nickel-based materials, molybdenum. Process details : Flame spraying uses the heat from the combustion of a fuel gas, usually acetylene or propane with oxygen, to melt the spray coating material. In this process a consumable, usually a powder or wire, is heated and propelled onto a substrate to form a surface coating.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Stress Relieving Services INR   0 INR  0
-NaN%

Stress Relieving Services

Stress Relieving Services A Mythri Metallizing (P) Ltd., we are rather proud to boast that we are equipped with the state-of-the-art , a 5x3x2.5 meters furnace for the purpose of Stress Relieving at our works in Peenya Industrial Area, Bangalore. Machining induces stresses in parts. The bigger and more complex the part, the more the stresses. These stresses can cause distortions in the part long term. If the parts are clamped in service, then cracking could occur. Also hole locations can change causing them to go out of tolerance. For these reasons, stress relieving is often necessary. Typically, the parts that benefit from stress relieving are large and complex weldments, castings with a lot of machining, parts with tight dimensional tolerances and machined parts that have had a lot of stock removal performed. Stress Relieving is the controlled heating and cooling of metals to alter their physical and mechanical properties without changing the product shape. Stress relieving is sometimes done inadvertently due to manufacturing processes that either heat or cool the metal such as welding or forming. Stress relieving is done at about 650°C for about one hour or till the whole part reaches the temperature. This removes more than 90% of the internal stresses. Alloy steels are stress relieved at higher temperature. After removing from the furnace, the parts are air cooled in still air. Stress Relieving is often associated with increasing the strength of material, but it can also be used to alter certain manufacturability objectives such as improve machining, improve formability, restore ductility after a cold working operation. Thus it is a very enabling manufacturing process that can not only help other manufacturing process, but can also improve product performance by increasing strength or other desirable characteristics. Steels are particularly suitable for heat treatment, since they respond well to heat treatment and the commercial use of steels exceeds that of any other material.

INR 0 INR 0

Availability:False

Pay mode:COD only

view details
1
false