CORROSIONPROTECTION 59a55410d146d50b3036cdb1 False 24 25
OK
background image not found
Found results for
'thermal spraying'
Chimney Coating Services INR   0 INR  0
-NaN%

Chimney Coating Services

Thermal Spray coating of Aluminium involves deposition of Aluminium of 99.5% purity over the prepared abrasive blasted surface. The sprayed metal is melted by using electric arc that is atomized with compressed air and projected over the substrate. According to the IS & BS Standards, the coating should be resistant up to 950 C temperature. The Aluminizing process is used to protect parts operating in high temperature environments against corrosion and oxidation. As a result, the most common parts coated are high temperature industrial chimney and muffler. Advantages of Aluminizing on Chimneys: • Aluminizing will with stand temperature upto 950 deg. Centigrade. • Aluminizing will with stand at elevated temperature (Due to elevated temperature there is a possibility of Painting can fail by performance (peel off). • Minimum expected life of Aluminizing will be 10 years & above in any Environmental conditions. • We have carried out Aluminizing on more than 100 chimneys for various companies across India. • We will give 10 years Warranty from the date of completion of work for the performance of Aluminizing.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Zinc Spray Coating Services INR   0 INR  0
-NaN%

Zinc Spray Coating Services

Thermal Spray Zinc Coating Services Atomized particles of molten Zinc are projected on to abrasive blasted steel surface from a special flame or arc pistol fed with Zinc wire. The process is often applied to structural components too large to be dipped in a galvanizing bath and to structures which are likely to distort during hot dip galvanizing. Zinc coatings for iron and steel provide excellent corrosion resistance in most atmospheres and in contact with many natural and synthetic substances. Zinc coatings are widely used to protect finished products ranging from structural steel work for Chemical, Fertilizer, Refinery, Cement, Power Plant, Buildings, Bridges, Pipelines, etc. The electrochemical relationship between zinc and steel enables zinc coatings also to protect steel at cut edges and at breaks in the coating by a sacrificial action. Applications : All steel structures Transformer tanks Radiators Dairy Coils Communication towers Steel Tanks Wind Mill Towers Electric Poles Gates Windows Building Structures Gutters in chemical-related industries Advantages : Proven long-term protection Cold process No size limitations Ideal surface for painting Site-jobs possible No hydrogen embrittlement Preferred even under alkaline condition

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Thermal Spray Aluminum Coating Services for Heat Exchanger INR   0 INR  0
-NaN%

Thermal Spray Aluminum Coating Services for Heat Exchanger

We involve in Thermal Spray Aluminum Coating Services for all kind of Heat Exchanger Equipment , Shell , Boiler Tubes , etc etc ....

INR 0 INR 0

Availability:False

Pay mode:COD only

view details
Flame Spray Aluminum Coating Services INR   0 INR  0
-NaN%

Flame Spray Aluminum Coating Services

Flame Spray Coating Services Flame spraying is a thermal spray coating process that produces high quality surface coatings using heat, from the combustion of a fuel gas with oxygen, to melt a spray coating material which is propelled onto a substrate. Flame spraying offers a cost effective alternative for applying metallic and ceramic coatings in a less demanding environment. The utilization of the flame spraying surface treatment allows the spraying of a wide variety of metallic or ceramic coatings on to a large range of component materials where good wear resistance and excellent impact resistance are required. As the surface technology specialists in flame spraying, Bodycote provides an array of thermal spray coating materials to suit your specific needs. Backed by a customer-driven service, our facilities process a wide variety of component sizes to exacting standards with reliable, repeatable results. Benefits There are particular reasons why flame spraying may be used: Component geometry or the working environment requires manual thermal spraying, offering the easiest working conditions; Large & complex areas (structures); The required thermal spray coating performance is achieved with flame spraying; and Cost effective Application & materials : Flame spraying is widely used where a cost effective thermal spray coating is desired and a lower quality can be tolerated. The majority of components are sprayed manually. Corrosion protection; structures and components Reclamation worn shafts, particularly of bearing areas with materials such as stainless steel or bronze alloys The surface coatings produced are porous and lubricants can be absorbed into the coating, enhancing performance of the bearing. Aluminium, zinc, stainless steel, bronze, low carbon steel, nickel-based materials, molybdenum. Process details : Flame spraying uses the heat from the combustion of a fuel gas, usually acetylene or propane with oxygen, to melt the spray coating material. In this process a consumable, usually a powder or wire, is heated and propelled onto a substrate to form a surface coating.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
TSA Coating Service INR   0 INR  0
-NaN%

TSA Coating Service

TSA Coating Service Thermal sprayed aluminium (TSA) coatings are widely specified for the protection of steels from aqueous corrosion, including offshore structures and components that are exposed to seawater immersion, tidal and splash zone environments. In this paper, the performance of TSA coatings prepared by conventional and newer wire thermal spray systems is presented. The TSA coatings were characterized in terms of deposition efficiency, coating micro structure including porosity and oxide content, surface roughness and coating adhesion. A cost analysis for coating deposition using the various systems is included. The corrosion behavior of the coatings was compared using an accelerated electrochemical corrosion test method. In addition, longer-term free immersion tests of up to 31 days were conducted in 3.5wt% NaCl solution, pH 7.9-8.2, 22-25°C. The TSA coating performance was quantified in terms of its free corrosion potential and the corrosion rate which was estimated from linear polarization resistance (LPR) measurements. The ability of the TSA coatings to provide adequate cathodic protection to exposed bare steel in immersed saline environment has been demonstrated. The newer systems have been shown to produce TSA coatings of improved quality and the effect of this on longer-term corrosion protection of steel substrates in immersed saline environment is discussed. Thermal Spray coating of Aluminium involves deposition of Aluminium of 99.5% purity over the prepared abrasive blasted surface. The sprayed metal is melted by using electric arc that is atomized with compressed air and projected over the substrate. According to the IS & BS Standards, the coating should be resistant up to 950 C temperature. The Aluminizing process is used to protect parts operating in high temperature environments against corrosion and oxidation. As a result, the most common parts coated are high temperature industrial chimney and muffler. Advantages : Site-job possible No size limitation Better surface preparation Cold process Pure aluminium coating Ideal surface for painting Standards : IS: 739 BS: 2569 Part I & II IS: 2590 BS: 1475

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Thermal Spray Aluminizing INR   0 INR  0
-NaN%

Thermal Spray Aluminizing

Thermal Spraying of Aluminum or Aluminizing involves deposition of Aluminum of 99.5% purity over the prepared surface. The sprayed metal is melted by using Electric Arc that is atomized with compressed air and projected over the substrate, and is prepared using Sand & Quartz Blasting. According to the IS & BS Standards, it would be resistant up to 950ºC temperature. The Aluminizing process is used to protect parts operating in high temperature environments against corrosion and oxidation. As a result, the most common parts coated are high temperature industrial chimney and muffler. Railway Bridges are aluminum metalized for corrosion protection as per Indian Railway Standard. Ship hulls are aluminum metalized periodically for corrosion protection as per IS & BS Standard.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
1
false